Related Manuals for ATO T Series
Summary of Contents for ATO T Series
- Page 1 T Series Touch Screen Viscometer Instruction Manual Welcome to visit our website! Any questions, please contact us... >> Email: sales@ato.com >> Phone: +1 800-585-1519 >> Website: www.ato.com...
-
Page 2: Table Of Contents
* This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! Dear User: Thank you for selecting our viscometer, please read through this Instruction Manual before correctly using this product. Any further revision will not be informed separately. -
Page 3: Working Principle And Purpose
* This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! I. Working principle and purpose The brand new touch screen viscometer is an intelligent instrument based on the ARM technology, and it is the first full touch screen viscometer in China replacing the traditional operation mode with keys and a small-size LCD. -
Page 4: Environmental Conditions
* This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! steps all models. 0.3~100 stepless speed change, R2, R3, R4, HADV-2T -80,000,000 ±1% 2000 optional rotating speed R5, R6, R7 steps 0.3~100 stepless speed change,... - Page 5 * This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! of the instrument at the center of the black circle. (4) Remove the protective cap under the instrument. (5) Connect the instrument to the power supply, and the assembled shape is shown as Fig.
- Page 6 * This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! fasten by the fixing screws (don’t touch rotor 0# when inserting), the cone end of fixing screw must be tipped to the triangular chute on the upper end of the outer sample cup.
- Page 7 * This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! (3) Screw the extension hook into the universal joint clockwise (counter-thread) as per Fig. 9, and select and hook a rotor according to the sample viscosity range. Notice: the universal joint must be gently lifted up when attaching or removing the extension hook, and the rotating shaft must be protected from damage.
- Page 8 * This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! (6) Fix the well installed metal connecting piece to the bottom casing of the main machine of the viscometer. The well installed part is shown as Fig. 10. 7) Adjust the immersion depth of the rotor, align the liquid level with the "Liquid level mark"...
- Page 9 * This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! controller, and the well installed shape is shown in Fig. 13. (The wire must be correctly connected by matching the slot with the corresponding position.) The front and back of the temperature controller NKY-25 is shown in Fig.
- Page 10 * This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! (6) After the rotor is inserted into the sample, check if the liquid level is suitable (see details in Fig.
-
Page 11: Preparation Before Test
* This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! Heating time setting: when the instrument is connected to the power supply at the standby state, press "SET" twice and the LCD will display "ST" (means it enters the time setting state), and then press "DOWN"... -
Page 12: Instrument Operating Interface And Operating Method
* This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! VI. Instrument operating interface and operating method Take model NDJ-8T for example, after turned on, the instrument will firstly display the initial interface and then enter the main menu after 3sec, and the main menu has 4 option bars: Viscosity test: test the viscosity of the sample;... - Page 13 * This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! 1. Viscosity test 1.1 Click “Viscosity test” to enter the interface of viscosity test (Fig. 18) which has 5 options: Continue test: continue testing in the previous testing conditions (before power off) Quick test: test the viscosity rapidly on by selecting a rotor and a rotating speed without...
- Page 14 * This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! 1.3 Parameter setting: set the testing parameters of the tested sample before viscosity test, in which, “Sample name”, “Spindle” and “speed” are options which must be filled while “End condit”, “QC scope”...
- Page 15 * This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! Tendency bar: it is the torque tendency bar, the scale represents the current torque percentage, and the red dot lines at both ends are 10% and 90% respectively Fig.
- Page 16 * This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! Density: the density of the tested sampled entered before testing, used to calculate the kinematic viscosity Kinematic viscosity (V): the kinematic viscosity of the tested sample QC scope: preset a viscosity range to determine if the viscosity tested conforms to the viscosity standard of the sample corresponded in the tendency bar below, in which, the red dot lines at both ends represent the minimum value and the maximum value.
- Page 17 * This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! 1.8 Automatic scanning: this function provides the operator with the optimal combination of rotor and rotating speed. Click the “SCNA” at the top right on the parameter setting interface and enter the scanning interface (Fig.
- Page 18 * This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! Fig. 27 4. Setting: set the time and date, etc of the instrument (Fig. 28). Fig. 28 4.1 Time and date setting: click “Time/date setting”...
- Page 19 * This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! Fig. 29 4.2 Background light adjustment: click “Backlight” to adjust the screen brightness via the “-” and “+” or by directly dragging the circular adjusting icon (Fig. 30). Fig.
- Page 20 * This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! Fig. 31 5. Operating interface of model STM-2T After turned on, the instrument will firstly display the initial interface and then enter the main menu after 3sec (Fig.
- Page 21 * This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! viscosity testing. If you do not enter a name, the name shows "Default" and the End time is 23:59:59 by default.
-
Page 22: Precautions
* This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! The tested data and coordinate curve can be saved and printed after testing. For measuring the viscosity of an unknown sample, the viscosity of the sample shall be estimated at first before selecting the corresponding combination of rotor and rotating speed. -
Page 23: Viscometer Standard Packing List
* This Instruction Manual is applicable for all viscosity meters, please read as per the model or configuration of the instrument you purchased! 6. The universal joint shall be protected by plastic cap when the instrument is being transported or handled. 7.
Need help?
Do you have a question about the T Series and is the answer not in the manual?
Questions and answers