Firmware Update - Russound UNO-TS2 Instruction Manual

Firmware Update

There may be future updates to the UNO-TS2
firmware. Updates will be available online through
the Document Center at www.russound.com ,
under RNET Systems. Before starting the update
procedure, download updates to a PC and con-
nect the Programming Cable (P/N 2500-121036)
from the PC to the OS update port on the front of
the UNO-TS2.
The Firmware Update page is reached from the
Installers Setup screen. When ready, press the
"Update my software" button to start the update
process. The controller must be power cycled
after the firmware has been updated. If multiple
screens are being updated, power cycle after all
have been updated.
1 OS UPDATE PORT - For programming cable
connection
2 RESET BUTTON - Resets UNO-TS2
Russound Information
The Russound Information page is accessed by
pressing on the Russound logo on the Installers
Setup screen. You can also press the "UNO" logo
on the touchscreen Home screen.
The screen shows the Russound phone number
and web address.
This screen can also be used as a "cleaning"
screen, as nearly all its inactive surface can be
firmly wiped without initiating any control actions.
INSTALLER GUIDE
Other Installer Setup Functions
Firmware Update
This screen is shown when
"Firmware Update" is selected
UNO-TS2 without front cover plate
Russound Information
This screen is shown when
"Russound" is pressed on the
Installers Setup screen
1
2
25