Controller Connections - Russound UNO-TS2 Instruction Manual

INSTALLER GUIDE
UNO-TS2 Touchscreen Controller Connections
For One UNO-TS2 per Controller
An RNET controller (CAV6.6, CAM6.6) supports
one UNO-TS2 and up to five UNO keypads per
UNO-TS2
CAT-5 Cable
For 2 to 6 UNO-TS2s per Controller
(One UNO-TS2 per Zone)
After the first UNO-TS2, any additional UNO-TS2s
must be connected to an SA-ZX3 Keypad
Splitter. The SA-ZX3 is powered by a 1201A 1A
power supply and uses an RJ-45 CAT-5 patch
UNO-TS2
SA-ZX3
CAT-5 Cable
UNO-TS2
20
UNO-S1 UNO-S2
102.5
UNO-S2
102.5
UNO-S1 UNO-S2
CAT-5 Cable
controller, directly connected to the UNO System
Keypad Ports located on the rear panel.
UNO-S2 UNO-S2
CAT-5 Cable
cable to connect to the controller's Keypad Port.
The UNO-TS2 connects to the SA-ZX3 with a
CAT-5 110 punchdown on the touchscreen end
and an RJ-45 connection on the SA-ZX3 end.
UNO-S1/S2 keypads sharing the SA-ZX3 with an
UNO-TS2 must be configured for the same zone.
UNO-TS2
SA-ZX3
CAT-5 Cable
CAV6.6
UNO-S2
CAV6.6
UNO-S2 UNO-TS2
SA-ZX3