Russound CAM66X Instruction Manual page 57

KEY CONFIG (KeyCf)
Key Configuration defines zone-specific key functions for each source. See Key Config. - Flow Chart
page 70
1. ZONE NUM –
(Zone#)
2. SOURCE NUM –
(Src #)
3. SELECT A KEY –
(SelKy)
4. KEY TYPE –
(KeyTp)
5. KEY NAME –
(KeyNm)
6. COMMAND TYPE –
(CmdTp)
a. Selected: Learned IR –
(LrnIR)
i. LEARNED SRC –
(LnSrc)
b. Selected: Unassigned
(Unasg)
c. Selected: Default
(Deflt)
d. Selected: Macro:
i. MACRO -
(Macro)
ii. MACRO ID –
(MacID)
e. All Other Selections:
7. DEVICE CODE –
(DevCd)
8. KEY FUNCTION –
(KeyFn)
Select the zone the key will be configured for. Changes are made
for that zone only; default setting is "All Zones."
Select the source the key will be configured for.
Using or , select the keypad key to be configured.
Either "Key Press," "Key Hold" or "Both" will activate the command.
Name that appears on the keypad display when the command is
activated.
Select the type of source command (e.g., CD, TV, etc.).
Choose Learned IR if the pre-programmed IR code library does
not support the source component.
Select the learned source bank to be assigned to the source
component. Procedure advances to KEY FUNCTION (step 8)
The key configuration is cleared. Procedure advances to SAVE
CHANGES (step 9)
Default selects the same device type and device code previously
setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 8)
(To build macros, see Macro Editor page 65)
Macro loads a series of commands which are processed when
activated.
Enter the macro ID number. Menu advances to SAVE CHANGES
(step 9)
Procedure advances to DEVICE CODE (step 7)
Enter source component code number listed in this manual's
Reference section.
Select a function for the button.
INSTALLER
INSTALLATION MENU
57