Peripheral Setup - Russound CAM66X Instruction Manual

The following items make up the Installation Menu:
PERIPH SETUP (PerSu)
CTRLR SETUP (CtlSu)
MACRO EDITOR (MacEd)
PERIPH SETUP (PerSu)
Peripheral Setup allows the CAM6.6's optional internal source to be configured.
The following items can be found in the PERIPH SETUP menu:
MEM NAME (MemNm)
TICS (Diags) FACTORY INIT (FInit)
MEM NAME (MemNm)
NOTE: A memory preset must be created and saved before it can be named. Once it is saved, the
preset's Tuner #, Bank # and Memory # must be entered in the following procedure.
This procedure accesses a name entry field to enter a custom name for a memory preset. See
Periph Setup - Flow Chart page 67
1. BANK # –
(Bank#)
2. MEMORY # –
(Mem #)
3. MEMORY NAME –
(MemNm)
BANK NAME (BnkNm)
This procedure accesses a name entry field to enter a custom name for each of the tuner's six
banks. See Periph Setup - Flow Chart page 67
1. BANK # –
(Bank#)
SOURCE SETUP (SrcSu)
POWER MGT (PwMgt)
SYSTEM INFO (SInfo)
BANK NAME (BnkNm)
SYSTEM INFO (SInfo)
Select the BANK # of the memory preset.
Select the MEMORY # of the preset to be named.
Use the up/down keys to select a character and left/right keys
to change a character position. A blinking cursor indicates the
placement of the character being entered. Names can be from 1
to 12 characters in length.
Select the BANK # of the memory preset.
INSTALLATION MENU
ZONE SETUP (ZonSu)
LEARN IR (LrnIR)
CONTROLLR ID (CtlId)
INSTALLER
DIAGNOS-
53