Table of Contents
Advertisement
UNO-S2 Keypad Control of Tuner
Selecting the tuner
On the UNO-S2 keypad, press
XM Tuner by choosing the tuner's preassigned
source number (1).
Selecting a Mode
Push
to toggle between XM modes.
Exiting a Mode
Press
to exit XM mode selection menu.
Selecting the desired channel
Use
and
for manual channel selection.
The channel will appear on the keypad. To move
quickly through the channels, press and hold
either
or
for more than 1.5 seconds
Signal Strength Mode
To check XM signal strength, press and hold
INTERNAL SOURCE - XM TUNER
then release. The display shows the signal
to select the
strength rating. To exit, press
Selecting a Bank
To select a bank, press and hold
up or
be temporarily displayed on the UNO-S2.
Recalling a Memory Preset
Press
ry presets for the selected bank. This procedure
will step through all of the presets in the current
bank, then loop back to start at the first one.
Only configured presets will be displayed.
Mute
.
Press
UNO-S2 Keypad Control
for bank down. The bank's name will
and
to scroll through the memo-
to mute/unmute the tuner audio output.
USER
again.
for bank
21
Advertisement
Table of Contents
