12Vdc Mute Trigger In/Out - Russound CAM66X Instruction Manual

INSTALLER
MAKING CONNECTIONS

12VDC Mute Trigger In/Out

12VDC Mute Trigger In
When 12VDC is applied to the Mute Trigger In,
the system will fully mute any source connected
to the Source Audio Input. The connections for
the trigger are made using a two-conductor cable
with 1/8" male mini-plug jacks. The tip is positive
(+) and sleeve is negative (-). This allows for the
connection of an external or muting device. The
CAM6.6 can be programmed to mute audio for
one or all zones as preferred when the 12VDC is
applied.
42
12VDC Mute Trigger Out
Mute Trigger Out 12VDC output is used for trig-
gering an external amplifier, muting device or
other component dependent on the Mute Trigger
In 12VDC. The connections for the output are
made using a two-conductor cable with 1/8"
male mini-plug jacks at each end. The tip is posi-
tive (+) and sleeve is negative (-). The default
setting for the Mute Trigger Out provides 12VDC
whenever 12VDC is applied to the Mute Trigger
In.
Doorbell Interface
A
NTENNA
CAM6.6