Playing A Usb Device; Using The Setup Menu - Insignia NS-HD2114 User Manual

Insignia NS-HD2114 DVD Shelf System
6 To see a picture again, press the REPEAT button. You can also
press the F.FWD, F.REV, and PLAY/PAUSE buttons to control
viewing.
7 To return to the main menu, press the STOP

Playing a USB device

To play a USB device:
1 Press the POWER button to turn on the shelf system.
2 Press the USB button on the remote control. A dialog box opens
showing the options available on the device.
3 Press the
to begin playback.

Using the Setup menu

In this menu system there are several ways to customize the settings.
Most menus consist of three levels to set up the options, but some
require more levels.
To change settings using the Setup menu:
1 Press SETUP on the remote. The Setup menu opens.
2 Press the
PLAY/ENTER button to go to that menu.
3 When the menu you want appears, press the
highlight a submenu, then press PLAY/ENTER to display the
options or submenu.
4 Press SETUP to close the menu.
Note
or button to select USB, then press PLAY/ENTER
DVD VIDEO AUDIO SYSTEM PASSWORD
-- DVD Setup --
OSD Language
Audio
Subtitle
Menu
Go To DVD Setup Page
or button to highlight a menu, then press the
Press to go back to the previous level.
www.insignia-products.com
ENG
ENG
ENG
ENG
button.
or button to
21