Insignia NS-HD2114 User Manual page 15

Insignia NS-HD2114 DVD Shelf System
If your TV has an S-Video input, connect an S-Video cable (7)
from the S-Video output on the shelf system to the S-Video input
on your TV.
- OR -
If your TV has component inputs, connect component cables
(4, 5, and 6) from the Y, Pb/Cb, Pr/Cr outputs on the shelf system
to the Y, Pb/Cb, Pr/Cr inputs on your TV.
Connecting to an amplifier
To connect your shelf system to an amplifier:
1 Connect the speakers (1 and 2) to the amplifier (3).
2 If your amplifier has digital coaxial (6) or optical (7) audio
connectors, connect the digital coaxial (or optical) output of your
shelf system (8) to the digital coaxial (or optical) inputs of your
amplifier (3). Do not use both digital coaxial and optical
connections.
If you use digital coaxial or optical cables, open the DVD menu
and set the digital output to SPDIF/RAW or SPDIF/PCM on the
audio setup page, then press PLAY/ENTER to save your settings.
- OR -
Connect audio L/R cables (4 and 5) from your shelf system (8) to
the Audio L/R inputs of your amplifier (3).
www.insignia-products.com 13