Hoover F7428 Manual

Turbopower carpet cleaner with auto rinse feature

Advertisement

Quick Links

The Easy to Use
Carpet Cleaner
HOOVER
SteamVac™ carpet cleaner cleans carpet fibers by
®
applying, scrubbing and removing hot tap water and cleaning
solution.
TurboPOWER
Carpet Cleaner with
Auto Rinse
ENGLISH
pp. 1-17
ESPAÑOL
pág. 18-27
Feature
www.hoover.com
®

Advertisement

Table of Contents
loading

Summary of Contents for Hoover F7428

  • Page 1 18-27 ™ ® ™ TurboPOWER ™ Carpet Cleaner with Auto Rinse Feature ™ The Easy to Use Carpet Cleaner HOOVER SteamVac™ carpet cleaner cleans carpet fibers by ® applying, scrubbing and removing hot tap water and cleaning solution. www.hoover.com...
  • Page 2: Important Safeguards

    Instructions”. take it to a Hoover Sales and Service Center or Authorized Hoover Warranty risk of electric shock. This appliance is • Do not clean over floor electrical Service Dealer.
  • Page 3: Table Of Contents

    If you need any assistance: Parts needed for assembly..3 Visit our website at www.hoover.com. Click on the “Service” button to find Assembling carpet cleaner ..3-6 the service outlet nearest you OR Carpet cleaner description .
  • Page 4: Attach Upper Handle

    The assembled cleaner will look like this drawing. Model with SpinScrub™ hand tool is shown. Attach upper handle NOTE: If the cord protector (A) on back of handle should become dislodged Remove clean water tank (upper tank) during unpacking, make sure it is repo- from carpet cleaner.
  • Page 5: Storing Hose And Tools

    1-10 1-11 Rotate top of caddy toward cleaner Storing hose and Identify the hose parts before storing handle. Slide caddy down so notch (G) hose. tools on caddy rests in hook (H) on cleaner. I. Nozzle connector end Press hose, a few inches from nozzle J.
  • Page 6 1-19 1-18 How to reattach tool Pull tool down and outward. To reposition the tool, reverse this proce- cover dure. The tool cover is designed with a break- away feature which allows it to snap free if it is pushed open too far. To reattach, align hinges of cover with holes on sides of tool storage area.
  • Page 7: Carpet Cleaner Description

    2. How to use The assembled carpet cleaner will look like the drawing. Carpet cleaner description Model with SpinScrub™ hand tool is shown. 1. Hand grip 2. Solution trigger: press to release cleaning solution 3. ON/OFF switch 4. Rinse Setting switch 5.
  • Page 8: Filling The Clean Water Tank

    Check clean water tank also; it may ting before cleaning. need to be refilled. Do not use without float and float retainer in place. If broken or dis- lodged, take to an Authorized Hoover Service Center or Dealer for repair. 2-10 The tanks How to fill...
  • Page 9 15 minutes. In case of contact with skin, wash with water. If irritation persists, call a physician. Fill container (16 oz.) with HOOVER WARNING: Certain oxygenated-type Carpet/Upholstery Detergent or cleaners, such as OxiClean* and HOOVER Hard Floor Cleaning Solution.
  • Page 10: Emptying The Recovery Tank

    3. How to clean Before you begin cleaning a. Vacuum thoroughly - For carpet, use a HOOVER vacuum cleaner with an agitator for best results. Vacuum uphol- stery with a vacuum cleaner with clean- ing tool attachments. Use a crevice tool to reach into tufts and folds.
  • Page 11: After Cleaning

    After cleaning a. Allow carpet or upholstery to dry. To help prevent matting and resoiling the carpet, keep children and pets away from surface until it is completely dry. If it is necessary to walk on damp car- pet, place towels or white cloths on the traffic areas.
  • Page 12: Cleaning Carpet

    1. Fill clean water tank according to instructions for Fig. 2-11. 9. Release trigger and slowly push car- 2. Fill detergent container with HOOVER pet cleaner forward over area just Carpet/Upholstery Detergent according sprayed with solution (dry stroke). Then to instructions for Figs.
  • Page 13: Using The Tools

    Rinse it in clear water. Do not 2. Fill detergent container with HOOVER remove plastic screen or foam from 8. To pick up dirty solution, release trig- Hard Floor Cleaning Solution according attachment.
  • Page 14: Cleaning Carpeted Stairs

    Figs. 2-9 to 2-12. 11. Lift tool, and position it against riser. 9. Pre-spray the carpeted stair by hold- 4. Fill detergent container with HOOVER Pull tool slowly over carpet without Carpet/Upholstery Detergent according ing the tool (A) or (B) about one inch pressing trigger (dry stroke).
  • Page 15: Cleaning Upholstery

    Figs. 2-9 to 2-12. 9. Overlap strokes by 1/2 inch to help prevent streaking. If additional cleaning is necessary, wait 4. Fill detergent container with HOOVER until the upholstery is completely dry Make additional strokes without pressing Carpet/Upholstery Detergent according before using the tool again.
  • Page 16: If You Have A Problem

    Storage Lubrication The motor is equipped with bearings Before storing: which contain sufficient lubrication for • Empty clean water tank and let air the life of the motor. The addition of dry. Replace on carpet cleaner. lubricant could cause damage. Do not •...
  • Page 17: Service

    (U.S. only). Canada or from a U. S. Military Do not send your cleaner to Hoover in Exchange. Appliances purchased else- North Canton, Ohio for service, this will where are covered by a limited two year only result in delay.

This manual is also suitable for:

Steam vac dual v f7428

Table of Contents