LG LCE30845 - 30in Induction Cooktop Service Manual page 37

Burner assembly (right)
1. Cut out the staple with nipper.
2. After pull over the temp. sensor enough, remove
the sensor holder with care.
3. Take out the black insulator.
4. Loose the two screws on the center of working coil.
5. Push the working coil base forward and lift the front
of that. (this working coil base is hooked onto
aluminum plate.
LGE Internal Use Only
DISASSEMBLY
- 37 - Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes