Table of Contents
Advertisement
Quick Links
Link to: Step In Portugal - Enrolador Genoa FD190 Installation Manual
IMPORTANT
: before assembling make sure that the diameter
of turnbuckle cage does not exceed the dimensions below.
Model
FD110
FD190
FD230
FD310
Max turnbuckle cage Ø (mm)
24
38
38
46
If the diameter of the open cage is too important, try a closed cage.
INSTALLATION MANUAL
FD110-190-230-310 MODELS
Advertisement
Table of Contents
Related Manuals for Facnor FD230
Summarization of Contents
Package Inventory
Box Content
Details the components included in the product box for setup and inventory.
Pre-Installation Notes
General Remarks
Provides general information and system characteristics before starting the installation process.
Maintenance
Offers guidance on maintaining the furling system's components for longevity and performance.
Electrical Danger and Mast Support
Highlights critical safety warnings regarding electrical hazards and mast support during installation.
Preparation for Assembly
Protecting Components
Advises on protecting system parts from damage during the assembly process.
Tools Needed
Lists the essential tools required for the successful assembly of the furling system.
Preparing Foil Sections
Describes the preliminary steps for preparing the foil sections before main assembly.
Assembly Stages
Assembly of the Halyard Deflector
Step-by-step instructions for assembling the halyard deflector component.
Assembly of Top Cap and Section
Details the process of assembling the top cap and the main top section.
Fitting the Halyard Swivel
Guidance on correctly fitting the halyard swivel to the furling system.
Assembling Foil Sections
Instructions for connecting and assembling the various foil sections.
Fitting the Telescopic Section
Procedure for installing the telescopic section into the main assembly.
Fitting the Feeder
Instructions for attaching the sail feeder to the telescopic section.
Fitting Bushing into Telescopic Section
Details on inserting and securing the bushing within the telescopic section.
Fixing Telescopic Section in Drum
Steps for securing the telescopic section to the main drum unit.
Fixing the Bottom of the Drum
Instructions for attaching the bottom part of the drum assembly.
Adjusting Sections
Guidance on adjusting the foil sections for proper alignment and fit.
Fitting the Sail Feeder
Final steps for installing the sail feeder onto the assembled system.
Reefing Line and Webbing Installation
Reefing Line/Webbing Setup
Instructions for fitting and positioning the reefing line or webbing.
Fitting the Front Deck Block
Guidance on installing the front deck block for the furling line.
Cutting the Webbing
Procedure for cutting the webbing to the correct length based on boat configuration.
Fitting Webbing into Drum
Steps for correctly installing the webbing into the drum mechanism.
Adjusting the Furling Line Guide
Guide Adjustment Procedure
Instructions for loosening, positioning, and tightening the furling line guide.
Post-Installation Check List
Furling Line and Forestay Checks
Verifies furling line position, forestay tightness, and halyard tension for optimal setup.
Component Alignment and Distances
Checks critical distances between components like deflector, swivel, and caps.
Bottom Pin and Forestay Connection Check
Ensures the bottom pin is correctly bolted and the forestay connection is secure.
Furlings Tips
Reefing and Sail Tensioning
Advice on proper sail tensioning and reefing techniques for performance.
Spare Sail and Luff Tape Usage
Recommendation for carrying a spare sail and using a luff tape for the groove.
Pre-departure Checks
Essential checks before leaving the boat for sail security and system readiness.
System Forcing Caution
Warning against forcing the reefing system and advice on troubleshooting.
Need help?
Do you have a question about the FD230 and is the answer not in the manual?
Questions and answers