Advertisement
Available languages
Available languages
important
Notes to the installer
1.
Read all instructions contained in these installation
instructions before installing the cooktop.
2.
Remove all packing material before connecting the
electrical supply to the cooktop.
3.
Observe all governing codes and ordinances.
4.
Be sure to leave these instructions with the consumer.
5.
Note: For operation at 2000 ft. elevations above see
level, appliance rating shall be reduced by 4 percent
for each additional I000 ft.
Important
Note to the Consumer
Keep these instructions with your Use and Care Guide for
future reference.
Depth Adjustment
Filmer Kit #903051o9010
This cooktop is designed to replace existing unit. If the
depth of your countertop opening is bigger than 7_/4" (18.4
cm) and less than 8Y2" (21.6 cm) you can order a free filler
kit #903051-9010 by calling Sears Parts & Repair Center at
1-800-4-MY-HOME®.
Optional
Item Available:
• A 9" (22.9cm) Stainless Steel Backsplash
Kit #903048-9010
This kit can be ordered for purchase through Sears Parts
& Repair Center at 1-800-4-MY-HOME®.
IMPORTANT
SAFETY
INSTRU
S
Installation of this cooktop must conform with local (:odes
or, in the absence of local codes, with the National Fuel
Gas Code ANSI Z223.1/NFPA54--1atest
edition in the
United States, or in Canada, with the Canadian Fuel Gas
Code, CAN/CGA B149 and CAN/CGA B149.2.
When installed in a manufactured (mobile) home
installation must conform with the Manufactured Home
Construction and Safety Standard, title 24 CFR, part
3280 [Formerly the Federal Standard for Mobile Home
Construction and Safety, title 24, HUD (part 280)] or,
when such standard is not applicable, the Standard for
Manufactured
Home Installation, ANS!/NCSBCS A225.1
or with local codes where applicable.
This (ooktop has been design certified by CSA
International. As with any appliance using gas and
generating heat, there are certain safety precautions you
should follow. You will find them in the Use and Care
Guide, read it carefully.
Be sure your
cooktop
is installed
and grounded
properly
by a qualified
installer
or service
technician.
• This cooktop
must
be electrically
grounded
in
accordance
with
tocat codes
or, in their
absence,
with
the National
Electrical
Code ANSI/NFPA
No.
70--latest
edition
in the United
States,
or in
Canada,
with
the Canadian
Electrical
Code,
CSA
C22.1 Part 1.
• The burners
can be tit manually
during
an
electricaJ
power
outage.
To Hght a burner,
hoJd a
tit match
to the burner
head,
then
slowly
turn
the
Surface
Control
knob
to MTE. Use caution
when
tighting
burners
manually.
• Do not store
items
of interest
to children
in
cabinets
above
the cooktop.
Children
could be
seriously
burned climbing
on the cooktop
to reach
items.
• To eliminate
the need to reach
over
the surface
burners,
cabinet
storage
space above
the burners
should
be avoided.
• Adjust
surface
burner
flame
size so it does
not
extend
beyond
the edge
of the cooking
utensit.
Excessive flame
is hazardous.
• Never
use your
cooktop
for warming
or heating
the room.
Prolonged
use of the cooktop
without
adequate
ventilation
can be hazardous.
• Do not store
or use gasoline
or other
flammable
vapors
and Jiquids
near
this or any other
appliance.
Explosions or fires could result.
The electrical
power
to the cooktop
must
be shut
off
while
gas line connections
are
being
made.
Failure
to do so coutd
resutt
in serious
injury
or death.
Advertisement
