Related Manuals for Vidos Duo S1204A
Summarization of Contents
Parts and Functions
Door Station Component Identification
Identifies and illustrates the components of the surface and flush mounted door stations.
Door Station Installation Guide
Provides step-by-step instructions for installing surface and flush mounted door station models.
Door Station Terminal Connections
Explains the purpose and connection points for lock control, motion detector, and main ports.
Basic Functions
Door Station Unlock Functions
Details how to unlock the door using ID cards, including authorized and unauthorized card feedback.
Fisheye Camera Feature
Describes the fisheye camera feature, including viewing angles and clarity.
External Motion Detector Integration
Explains connecting an external motion detector for automatic unlock or light activation.
Setup Instructions
System Settings Overview
Overview of system settings like address, calling mode, resolution, unlock time, and illumination.
Configure Door Station Addresses
Guides on configuring unique addresses (0-3) for multiple door stations in the system.
Set Door Station Calling Mode
Explains how to set the door station to Standard or Group calling mode for monitor interaction.
Adjust Camera Resolution Settings
Details how to adjust the camera's image quality to High or Low resolution.
Configure Unlock Mode Settings
Describes configuring the lock to be Normally Opened or Normally Closed after unlocking.
Adjust Door Unlock Time
Explains how to adjust the duration the electric lock remains open, from 1 to 99 seconds.
Set Nameplate Illumination Modes
Covers setting the nameplate light to be Always On, Always Off, or Automatic.
Configure Night View LED Modes
Details how to set the night vision LEDs to Normally On, Normally Off, or Auto.
Configure Ring-back Tone
Explains how to configure the ring-back tone to ring once, continuously, or not at all.
Set Monitor Image Display Modes
Configures how the image is displayed when a call is received or answered on the monitor.
Registering and Managing User ID Cards
Instructions for adding and managing up to 320 user cards using master cards.
Switching Access Control Methods
Details how to switch between door station control and DT-ACC for access management.
Add New User ID Cards
Step-by-step process for adding new user ID cards to the system.
Delete User ID Cards
Procedures for removing specific user ID cards from the system.
Initialize Access Control (Delete All Cards)
Instructions for performing a factory reset to clear all registered user cards.
Factory Reset Procedure
Guide on how to reset the door station to its original factory default configuration.
Wiring
Wiring Electric Locks
Explains wiring configurations for internal power and dry contact electric locks.
One-to-One System Wiring
Illustrates the wiring setup for a simple one-door station to one-monitor system.
Multi Door Station Wiring with M-SM4
Shows how to connect multiple door stations using the M-SM4 distribution module.
Multi Monitor Wiring Configuration
Details basic IN-OUT wiring for connecting multiple monitors in standard mode.
Star Topology Wiring with M-SM4
Illustrates the star topology wiring configuration using the M-SM4 module.
Appendix
Product Handling Precautions
Lists important safety and handling advice for the product.
Technical Specifications
Provides detailed technical specifications for Seria S1100 and S1200 models.
Cable Requirements and Distances
Details recommended cables and maximum wiring distances for system installation.
Star Topology Cable Distances
Shows cable distances for the star topology wiring mode using M-SM4.
Need help?
Do you have a question about the Duo S1204A and is the answer not in the manual?
Questions and answers