Related Manuals for Vidos Duo S1104A
Summarization of Contents
Vidos Duo System Overview
Door Station Models
Visual presentation of available surface and flush mounted door station models.
System Characteristics
Key Features of the VIDOS DUO System
Highlights the system's capabilities like connectivity, capacity, and communication features.
Parts and Functions
Surface Mounted Door Station Components
Identifies and labels parts of the surface-mounted door station models.
Flush Mounted Door Station Components
Identifies and labels parts of the flush-mounted door station models.
Mounting Instructions
Surface Mounted Installation Guide
Step-by-step instructions for installing surface-mounted door stations on a wall.
Flush Mounted Installation Guide
Step-by-step instructions for installing flush-mounted door stations.
Terminal Descriptions
Lock Control and PIR Sensor Ports
Details the terminal for lock control jumper and PIR motion detector connection.
Main Connection Port Details
Explains the terminals for bus line and electronic lock connections (L1, L2, PL, S+, S-).
Basic Functions
Unlock Operations and Camera Features
Describes ID card unlocking, buzzer feedback, and fisheye camera viewing angles.
External Motion Detection
Explains the function and connection of an external motion detector for system activation.
Setup Instructions
Function Settings Overview
Provides a table summarizing configurable settings, their ranges, and default values.
Door Station Configuration
Setting Door Station Address
Guides users on how to assign unique addresses (0-3) to door stations.
Setting Door Station Calling Mode
Explains how to configure standard or group calling modes for door stations.
Camera and Unlock Settings
Setting Camera Resolution
Instructions to adjust the camera image quality between high and low resolution.
Setting Unlock Mode
Details how to set the unlock mode to normally opened or normally closed.
Time and Illumination Settings
Setting Unlock Time
Procedure to adjust the duration the door lock remains unlocked (1-99 seconds).
Setting Nameplate Illumination Mode
Configures the nameplate illumination to be on, off, or automatic.
Night View and Ring-back Tone
Setting Night View LED Illumination
Configures the night view LED indicator to be on, off, or automatic.
Setting Ring-back Tone
Options to set the ring-back tone to ring once, continuously, or be silent.
Image Display Mode Configuration
Image Display Modes During Call
Sets how the image is displayed when the monitor is called (alternate, zoom, full screen).
Image Display Modes When Answering
Configures image switching behavior when answering a call (activated or forbidden).
ID Card Management
Registering and Authorizing ID Cards
Instructions for registering user cards and understanding master card authorization.
Access Control Management
Switching Access Control Source
Procedure to switch access control between door station and DT-ACC.
Adding User Cards
Step-by-step guide for adding new user cards to the system.
User Card and System Reset
Deleting and Initializing User Cards
Instructions for deleting individual user cards or initializing all cards.
Reset to Factory Settings
Procedure to restore the door station to its original factory default settings.
Wiring
Connecting Electric Locks
Guides for connecting electric locks using internal power or dry contact methods.
Wiring Configurations
Basic One-to-one Wiring
Diagram and explanation for connecting a single door station to a monitor.
Multi Door Station Wiring (M-SM4)
Wiring diagram for connecting multiple door stations using the M-SM4 module.
Multi Monitor Wiring
Basic IN-OUT Monitor Wiring
Explains basic IN-OUT wiring for connecting monitors in standard mode.
Monitor Addressing by House Count
Guidance on setting monitor addresses for one/two or three/four house setups.
Advanced Wiring Topologies
Star Topology Wiring with M-SM4
Illustrates star topology wiring using the M-SM4 module for system expansion.
Appendix
Precautions for Use
Important safety and handling guidelines for the door station unit.
Technical Specifications
Details technical specifications for Series S1100 and S1200 door stations.
Cabling and Requirements
Basic IN-OUT Wiring Cable Distances
Provides recommended cable types and maximum distances for basic IN-OUT wiring.
Wiring Mode Cable Distances
Star Topology M-SM4 Cable Distances
Specifies cable types and maximum distances for star topology wiring with M-SM4.
Warranty Information
Warranty Terms and Conditions
Outlines the warranty period, coverage, exclusions, and service procedures.
Service Centre Details
Provides contact information and address for the product's service center.
Need help?
Do you have a question about the Duo S1104A and is the answer not in the manual?
Questions and answers