Related Manuals for Edwards iQDP
Summarization of Contents
Introduction
1.1 Scope and definitions
Defines the scope and terminology for the manual, covering installation, operation, and maintenance.
1.2 Description
Details the two models of Exhaust-Silencers and their primary function in attenuating pump pulses.
1.3 Construction
Explains the physical components and assembly of the Exhaust-Silencer, including chambers and flanges.
1.4 Principle of operation
Describes how exhaust gases flow through the silencer's stages for effective attenuation.
Installation
3.3 Unpack and inspect
Instructions for checking the silencer upon arrival and handling any damage or defects.
3.4 Remove the old Exhaust-Silencer (if necessary)
Step-by-step guide for safely disconnecting and removing existing silencers from the pump system.
3.1 Safety
Critical safety precautions to follow during the installation process to prevent injury or damage.
3.2 System requirements
Specifies necessary system configurations, pressure ratings, and pipeline considerations for installation.
3.5 Fit the new Exhaust-Silencer
General procedures for fitting the new Exhaust-Silencer to various pump models.
3.5.1 Fit the new Exhaust-Silencer to a QDP, iQDP or CDP i, Ei or Si pump
Detailed procedure for installing the silencer on QDP, iQDP, or CDP i, Ei, Si pump models.
3.5.2 Fit the new Exhaust-Silencer to a CDP Ni pump
Specific instructions for installing the Exhaust-Silencer on CDP Ni pump models.
3.6 Leak-test the installation
Procedure for leak testing the system after installation to ensure containment and safety.
Technical Data
2.1 Mechanical data
Provides physical specifications including mass, dimensions, and inlet/outlet connections.
2.2 Performance
Details performance metrics like maximum throughput, back-pressure, and pulse attenuation.
2.3 Operating and storage conditions
Outlines the environmental parameters required for safe operation and storage of the silencer.
2.4 Construction materials
Lists the materials used for the silencer body and 'O' rings.
Maintenance
4.1 Introduction
Introduces the maintenance section and safety information for servicing the silencer.
4.1.1 Safety information
Provides essential safety precautions for personnel performing maintenance tasks.
4.1.2 Overheated fluorinated materials
Warns about dangerous breakdown products from fluorinated materials when overheated.
4.2 Frequency of maintenance
Recommends inspection intervals and discusses factors affecting maintenance frequency.
4.3 Inspect and clean the Exhaust-Silencer
Detailed steps for dismantling, inspecting, cleaning, and reassembling the Exhaust-Silencer.
Storage and Disposal
5.1 Storage
Guidance on storing the Exhaust-Silencer in cool, dry conditions with protective covers.
5.2 Disposal
Instructions for safely disposing of the Exhaust-Silencer according to environmental requirements.
Spares and Accessories
6.1 Introduction
Information on obtaining spare parts and accessories from Edwards companies worldwide.
6.2 Spares
Lists available service kits and parts, including the Exhaust-Silencer service kit.
Need help?
Do you have a question about the iQDP and is the answer not in the manual?
Questions and answers