Asus PIKE 2008 IMR User Manual page 12

For 1U server
You have to remove the outer heatsink of ASUS PIKE 2008/IMR SAS RAID card to
install the card in a 1U server.
To install ASUS PIKE 2008/IMR SAS RAID card on a 1U server
1. Remove the two screws that secure
the heatsink bracket on the back of
the SAS RAID card.
2. Remove the two screws that
secure the outer heatsink on the
front of the SAS RAID card.
DO NOT remove the inner
heatsink from the SAS RAID
card.
3. Locate the PIKE RAID card slot on
the motherboard.
1-6
Heatsink bracket
Chapter 1: Product introduction