Nic Indicator Codes; Nvram Card Indicator Codes - Dell DR4000 Owner's Manual

NIC Indicator Codes

Figure 1-4. NIC Indicators
1 link indicator
Indicator
Link and activity
indicators are off
Link indicator is green
Link indicator is amber
Activity indicator is green Network data is being sent or received.

NVRAM Card Indicator Codes

The NVRAM Card has a surface-mounted LED indicator as well as two LED
indicators on the metal bracket to indicate the status.
NOTE:
Ensure that all the LED indicators are off before you remove the NVRAM card.
Table 1-1 describes LED indicators behavior during normal powered
operation of the NVRAM card and Table 1-2 describes LED indicators
behavior in the event of power loss.
Table 1-1. LED States during Normal Powered Operation of NVRAM Card
Green Indicator
Steady
Steady
1
Indicator Code
The NIC is not connected to the network.
The NIC is connected to a valid network link
at 1000 Mbps.
The NIC is connected to a valid network link
at 10/100 Mbps.
Amber Indicator
Steady
Blinking
2
2 activity indicator
Description
Firmware is booting.
NOTE:
The LEDs remain in this state
during the data restoration process
Supercapacitors are charging.
About Your System
17