Installing A Hard Drive Into A Hard-Drive Bay - Dell DR4000 Owner's Manual

Figure 3-9. Removing and Installing an Internal Hard Drive From the Internal
Hard-Drive Bay
3
2
1
1 internal hard drive bay
3 screws (4)
*Screws are supplied along with the hard drives ordered from Dell.

Installing a Hard Drive Into a Hard-Drive Bay

1 Insert the hard drive into the internal hard-drive bay with the connector
end of the drive at the back, until it is flush with the back of the hard-drive
bay. See Figure 3-9.
2 Attach the four screws to secure the hard drive to the hard-drive bracket.
70
Installing System Components
*
2 release latch
4 internal hard drive
4