Boot Settings Screen; Integrated Devices Screen - Dell DR4000 Owner's Manual

Boot Settings Screen

Option
Boot Mode
(BIOS default)
Boot Sequence
Hard-Disk Drive
Sequence
USB Flash Drive
Emulation Type
(Auto default)
Boot Sequence Retry
(Disabled default)

Integrated Devices Screen

Option
Integrated SAS
Controller
(Enabled default)
User Accessible USB
Ports
(All Ports On default)
Internal USB Port 1
(On default)
Internal USB Port 2
(On default)
Embedded NIC1 and
NIC2
(Enabled default)
Description
CAUTION:
the system from booting if the operating system was
not installed in the same boot mode.
Setting this field to BIOS allows compatibility with non-
UEFI operating systems.
This field indicates to the system, the location of the
operating system files needed for startup.
Determines the order in which the BIOS attempts to
boot from hard drives in the system during system
startup.
Determines the emulation type for a USB flash drive.
Hard disk allows the USB flash drive to act as a hard
drive. Auto automatically chooses an emulation type.
If this field is enabled and the system has failed to boot,
the system reattempts to boot after 30 seconds.
Description
Enables or disables the integrated storage controller.
Enables or disables the user-accessible USB ports. Options
are All Ports On, Only Back Ports On, and All Ports Off.
Enables or disables the internal USB port.
Enables or disables the internal USB port.
Enables or disables the OS interface of the two embedded
NICs. (The NICs may also be accessed through the
system's management controller.)
Using the System Setup Program and UEFI Boot Manager
Switching the boot mode could prevent
45