Dell 8 Update Manual page 2

Table 1. Power Specifications
Hardware
Blade - Model 10G-MAG
(Dell PowerEdge M605)
Blade - Model 10G-TOM
(Dell PowerEdge M600)
Blade Messages
Table 2 updates the following blade messages listed in your Hardware Owner's
Manual:
"This system does not support processors greater than 95W." has been
•
revised.
• "This system only supports AMD™ Opteron™ 2000 series processors.
System halted. (PowerEdge M605 only)" is no longer applicable and has
been deleted from the BIOS.
Table 2. Blade Messages
Message
This system does
not support
Opteron SE
processors.
Rating
12VDC, 33.33A
12VDC, 35A
Causes
Unsupported processor(s)
installed.
Corrective Actions
Replace the processor(s)
with a supported version.
See "Processors"
on page 113.