Related Manuals for AGRIMASTER RVL 250
Summarization of Contents
Warnings
0.1 Safety
General safety information and precautions for using the shredder.
0.2 Staff in charge of the shredder
Defines roles and responsibilities of personnel operating the shredder.
0.3 Warning tags on the shredder
Explains various warning labels and their meanings on the shredder.
0.4 Manual
Information regarding the manual's compliance and purpose.
Informations
1.1 About the manufacturer and the shredder
Details on the identification tag and its information on the shredder.
1.2 For your safety
Crucial safety rules and precautions for operating the shredder.
Description
2.1 General description
Overview of RV and RVL shredder series features and capabilities.
2.1.1 Standard equipment
Lists the standard components included with the shredder.
2.2 Specifications
Technical data and specifications for different shredder models.
2.2.1 Noise
Noise level measurements for different operating conditions.
2.3 Set-up of the working position
Instructions on adjusting the shredder's working position.
Lifting
3.1 Lifting
Procedures and safety requirements for lifting the shredder.
Installation
4.1 Connections
Guidelines for connecting the shredder to the tractor.
4.1.1 Warnings
Important warnings related to connecting the shredder.
4.1.2 Three-point connection
Steps for connecting the shredder via the three-point hitch.
4.2 Cardan shaft
Information and checks related to the cardan shaft.
4.2.1 Cardan shaft length control
Procedure for checking and adjusting the cardan shaft length.
4.2.2 Connection of cardan shaft with safety pin with spring return
Instructions for connecting the cardan shaft with safety pin.
4.3 Working position with manual displacement
How to set the working position using manual displacement.
4.4 Cardan shaft rest
Description of the cardan shaft rest feature.
Safety Systems
5.1 Safety devices
Details on safety components like the cardan shaft and linkage points.
Use
6.1 Getting started
Initial steps before starting the shredder operation.
6.2 Working height adjustment
How to adjust the working height of the shredder roller.
6.3 Start for work beginning
Procedure for starting work with the shredder.
Troubleshooting
7.1 Finding the cause of the problem
Guide to identifying causes of operational problems using tables.
Maintenance
8.1 Before a working session
Pre-operation checks and maintenance tasks.
8.2 After the first 2 working hours
Specific checks after the initial 2 working hours.
8.3 Every 8 working hours
Routine maintenance tasks required every 8 working hours.
8.4 After the first 100 working hours
Maintenance tasks after the first 100 working hours, including oil change.
8.5 Every 300 working hours
Maintenance tasks required every 300 working hours.
8.6 Drive belts
Information on drive belt tensioning and replacement.
8.7 Storing the shredder
Guidelines for storing the shredder during idle periods.
8.8 Cardan shaft
Maintenance instructions for the cardan shaft.
Accessories
9.1 Rotor blades
Information on rotor blades, including replacement and assembly.
9.1.1 Blades replacement
Detailed steps for replacing the shredder blades.
9.1.2 Blades assembly
Instructions for assembling and tightening the shredder blades.
9.2 Manual or hydraulic displacement
How to assemble manual or hydraulic displacement systems.
9.3 Support roller
Assembly instructions for the support roller accessory.
Enclosures
10.1 Introduction
Introduction to the enclosures section for feedback on translation.
Need help?
Do you have a question about the RVL 250 and is the answer not in the manual?
Questions and answers