Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AGRIMASTER REF 190
Summarization of Contents
Warnings (0)
Safety (0.1)
General safety precautions for operating agricultural machinery.
Staff in charge of the shredder (0.2)
Differentiates staff roles (Operator, Trained Technician).
Warning tags on the shredder (0.3)
Explains various warning tags with figures.
Manual documentation and hazard symbols
Explains manual compliance and hazard symbols (Danger, Caution, Warnings, Note).
Informations (1)
About the manufacturer and the shredder (1.1)
Information about manufacturer and shredder identification.
For your safety (1.2)
Crucial safety instructions regarding operation and transport.
Description (2)
General description (2.1)
Overview of shredder features and applications.
Specifications (2.2)
Technical data including dimensions and capacity.
Blades assembly (2.1.1)
Instructions for blade replacement and safety precautions.
Noise (2.2.1)
Reports noise level measurements during operation.
Lifting (3)
Lifting (3.1)
Information for moving the shredder properly.
Installation (4)
Connections (4.1)
Information for installing and connecting the shredder.
Cardan shaft (4.2)
Details on cardan shaft installation and length.
Warnings (4.1.1)
Warnings regarding PTO speed and rotation direction.
Three-point-hitch (4.1.2)
Instructions for connecting the three linkage points.
Cardan shaft length control (4.2.1)
Procedure to measure and adjust cardan shaft length.
Connection of cardan shaft with safety pin with spring return (4.2.2)
Step-by-step guide for connecting the cardan shaft.
Safety Systems (5)
Safety devices (5.1)
Overview of safety components and their function.
Belt transmission, operator protection, gearbox protection
Describes safety covers and guards for transmissions and operator.
Use (6)
Getting started (6.1)
Procedure for setting up the shredder before work.
Working height adjustment (6.2)
Details on adjusting front and rear wheel heights.
Start for work beginning (6.3)
Instructions for starting, clutch, PTO speed, and ground conditions.
Troubleshooting (7)
Finding the cause of the problem (7.1)
Guide to identify and resolve operational issues.
Maintenance (8)
Before a working session (8.1)
Daily checks before starting work.
After first 2 working hours (8.2)
Check belt tension after initial use.
Every 8 working hours (8.3)
Daily cleaning and lubrication.
After the first 100 working hours (8.4)
Gearbox oil replacement procedure.
Every 300 working hours (8.5)
Repeat gearbox oil replacement.
Driving belts (8.6)
Maintenance of drive belts (tensioning, replacement).
Storing the shredder (8.7)
Instructions for long-term storage.
Cardan shaft (8.8)
Refers to an attached guidebook for cardan shaft maintenance.
Enclosures (9)
Introduction for customer feedback on translation
Request for corrections on translation errors in the manual.
Need help?
Do you have a question about the REF 190 and is the answer not in the manual?
Questions and answers