Power On Configuration - Asus DSBF-DM SAS User Manual

4.4.7

Power On Configuration

This menu shows the power configuration settings. Select an item then press
<Enter> to display the configuration options.
Advanced
Restore on AC Power Loss
Power On By PME#
Power On By RTC Alarm
F1 Help
↑↓
ESC Exit
→←
Restore on AC Power Loss [Last State]
When set to [Power Off], the system goes into "off state" after an AC power
interruption. When set to [Power On], the system turns on automatically after a
power interruption. When set to [Last State], the system goes into whatever was
the system state (on or off) before the power interruption.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PME# [Disabled]
Allows you to enable or disable the PME and onboard LAN to generate a wake-up
event. Configuration options: [Disabled] [Enabled]
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake-up event.
Configuration options: [Disabled] [Enabled]
ASUS DSBF-DM Series
PhoenixBIOS Setup Utility
Power On Configuration
[Last State]
[Disabled]
[Disabled]
Select Item -/+
Select Menu Enter
Item Specific Help
Configures the system
state after recovering
from power failure.
Change Values F9
Select Sub-Menu F10
Setup Defaults
Save and Exit
4-27