Table of Contents
Advertisement
8.
Onboard SATA setting (3-pin SATA_EN1, SATA_EN2)
(DSBF-DM model only)
This jumper allows you to enable or disable two onboard Marvell
controller. Set the jumper to pins 1-2 to enable the SATA function (default).
®
DSBF-DM Series SATA setting
9.
Force BIOS recovery setting (3-pin RECOVERY1)
This jumper allows you to quickly update or recover the BIOS settings when it
becomes corrupted.
To update the BIOS:
1.
Prepare a floppy disk that contains the latest BIOS for the motherboard
and the Phoenix Phlash16 utility. Make sure you download the correct
BIOS for your motherboard model. Refer to 4.1.3 for more information
on creating the BIOS recovery diskette.
2.
Set the jumper to pins 2-3.
3.
Insert the floppy disk then turn on the system to update the BIOS.
4.
Shut down the system.
5.
Set the jumper back to pins 1-2.
6.
Turn on the system.
®
DSBF-DM Series BIOS recovery setting
ASUS DSBF-DM Series
SATA controller 1
SATA_EN1
SATA_EN2
1 2
Enable
SATA controller 2
(Default)
RECOVERY1
1 2
Normal
BIOS Recovery
(Default)
6145 SATA
®
2 3
Disable
2 3
2-31
Advertisement
Table of Contents
