Asus DSBF-DM SAS User Manual page 163

The Select New Array Type screen apprears.
4.
Use the arrow keys to select Create IS Volume, then press <Enter>.
LSI Logic Config Utility
Select New Array Type -- SAS1068
Create IM Volume
Create IME Volume
Create IS Volume
Esc = Exit Menu
Enter = Choose array type to create
The Create New Array screen shows the disks you can add to make up
5.
the IS volume. Use the arrow key to select a disk, then move the cursor to
the RAID Disk column. To include this disk in the array, press <+>, <->, or
<Space>.
LSI Logic Config Utility
Create New Array -- SAS1068
Array Type:
Array Size(MB):
Slot Device Identifier
Num
0 SEAGATE ST373454SS
1 SEAGATE ST373454SS
2 SEAGATE ST373454SS
3 SEAGATE ST373454SS
Esc = Exit Menu
SPACE/+/- = Select disk for array or hot spare
By default, the RAID Disk field shows No before array creation. This field is
grayed out under the following conditions:
• The disk does not meet the minimum requirements for use in a RAID array.
• The disk is not large enough to mirror existing data on the primary drive.
• The disk has been selected as the Hot Spare for the RAID array.
• The disk is already part of another array.
ASUS DSBF-DM Series
v6.16.00.00 (2007.05.07)
Create Integrated Mirror Array of 2
disks plus an optional hot spare. Data
on the primary disk may be migrated.
Create Integrated Mirrored Enhanced
Array of 3 to 8 disks including an
optional hot spare.
ALL DATA on array disks will be DELETED!
Create Integrated Striping array of
2 to 8 disks.
ALL DATA on array disks will be DELETED!
F1/Shift+1 = Help
v6.16.00.00 (2007.05.07)
IS
102996
RAID
Disk
0003 [Yes]
0003 [NO]
0003 [Yes]
0003 [Yes]
F1/Shift+1 = Help
Hot Drive Pred
Spr Status Fail
[NO] ------- ----
[NO] ------- ----
[NO] ------- ----
[NO] ------- ----
C = Create array
Size
(MB)
70007
70007
35003
35003
5-53