Table of Contents
Advertisement
SETUP prompt [Enabled]
When this item is set to [Enabled], the system displays the message "Press DEL to
run Setup" during POST. Configuration options: [Disabled] [Enabled]
Interrupt 19 Capture [Enabled]
When set to [Enabled], this function allows the option ROMs to trap Interrupt 19.
Configuration options: [Disabled] [Enabled]
4.8
Exit menu
Main
Advanced
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Setup Defaults
F1
Help
ESC
Exit
Save Changes and Exit
Select this option then press <Enter>, or simply press <F10>, to save your changes
to CMOS before exiting the Setup utility.
When a confirmation window appears:
•
select [Yes], then press <Enter> to save and exit.
•
select [No], then press <Enter>, or simply press <Esc>, to cancel the command
and return to the Exit menu.
Discard Changes and Exit
Select this option then press <Enter> if you wish to exit the Setup utility without
saving your changes.
When a confirmation window appears:
•
select [Yes], then press <Enter> to discard your changes and exit.
•
select [No], then press <Enter>, or simply press <Esc>, to cancel the command
and return to the Exit menu.
4-38
PhoenixBIOS Setup Utility
Server
Select Item
↑↓
Select Menu
→←
Security
Boot
-/+
Change Values
Enter
Select
Sub-Menu
Exit
Item Specific Help
Save any changes to CMOS
exit BIOS Setup and then
reboot system.
F9
Setup Defaults
F10
Save and Exit
Chapter 4: BIOS setup
Advertisement
Table of Contents
