Table of Contents
Advertisement
5.
SAS connectors (DSBF-DM/SAS model only)
This motherboard comes with two Serial Attached SCSI (SAS) connectors,
the next-generation storage technology that supports both Series SCSI and
Serial ATA (SATA). Each connector supports one device.
®
DSBF-DM Series SAS connectors
To connect the SAS cable:
Plug in the SAS cable to the SAS
connector until the cable lock snaps
in place.
6.
LPC debug card connector (14-1 pin LPC1)
This is a low pin count interface used to plug in the LPC debug card.
®
DSBF-DM Series LPC debug card connector
ASUS DSBF-DM Series
To disconnect the SAS cable:
1.
With your thumb, push down the
cable lock to release.
2.
While still keeping your
thumb's grip on the cable lock,
carefully pull away the cable from
the connector.
LPC1
PIN1
1
2
2-35
Advertisement
Table of Contents
