Table of Contents
Advertisement
5.2.2
Creating a RAID 10 set
You can create a RAID 10 set using four identical hard disk drives.
To create a RAID 10 set using the Easy Configuration option:
From the utility main menu, highlight Configure, then press <Enter>.
1.
Use the arrow keys to select Easy Configuration, then press <Enter>.
2.
The ARRAY SELECTION MENU displays the available drives connected to
3.
the SATA ports. Select the drive(s) you want to include in the RAID set, then
press <SpaceBar>. When selected, the drive indicator changes from READY
to ONLIN A[X]-[Y], where X is the array number, and Y is the drive number.
The information of the selected hard disk drive displays at the bottom of the
screen.
5-10
Chapter 5: RAID configuration
Advertisement
Table of Contents
