Table of Contents
Advertisement
2.
Use a Phillips screwdriver to tighten
the four heatsink screws in a
diagonal sequence.
3.
Connect the fan cable to the 4-pin
connector labeled CPU_FAN1.
DO NOT forget to connect
the CPU fan cable! Hardware
monitoring errors may occur if
you fail to plug this connector.
4.
Repeat steps 1 to 3 to install the other heatsink if you have installed a second
CPU, then connect the fan cable to the 4-pin connector labeled CPU_FAN2.
2-14
CPU_FAN1
connector
Chapter 2: Hardware information
Advertisement
Table of Contents
