Table of Contents
Advertisement
8.
Click Have Disk.... Select A: floppy diskette for the network driver
and click OK.
9.
Select "Intel® PRO/1000MT Network Connection" from the listed
Network Adapters. Click Next. System would prompt you an
Update Driver Warning message. Click Yes to continue installing
driver.
10.
Click Finish. Windows 2000 system will prompt if you want to
restart the system now. After system been restarted, the new driver
will be loaded into the system.
®
5.2.2 ATI
Rage XL Display Driver Installation
Windows 2000 system can correctly recognize ATI RAGE XL PCI driver
during system installation. User needs not to load any driver for supporting
the on-board ATI RAGE XL graphics chip.
5.2.3 Enabling ATA100 Feature in Windows
To enable the ATA100 feature under Windows 2000, you need to upgrade
to Windows 2000 Service Pack 2 or later.
ASUS motherboard user guide
®
2000
5-7
Advertisement
Table of Contents
