Table of Contents
Advertisement
®
5.1.2 ATI
Rage XL Display Driver Installation
1.
Start up Windows NT in VGA mode.
2.
Run the Windows NT Display program located in the Control Panel,
under Settings in the Start menu or right click the mouse button on
the desktop and select Properties from the popup menu.
3.
Select the Settings tab.
4.
Select Display Type....
5.
Select Change... from the display options.
6.
Select Have Disk...
7.
Windows NT system will prompt you for the correct path, enter the
path of the driver, such as D:\ Drivers\ATI\Nt40\ATIDrive (assuming
your CD-ROM drive is letter D)
8.
A list of video adapters will be displayed. Select the "XPERT 98
PCI", then click on OK button.
9.
Windows NT will once again prompt for confirmation. All appropriate
files are then copied to the hard disk. Select Apply in Control Panel.
10. The installed driver will become active once you restart Windows NT.
ASUS motherboard user guide
5-5
Advertisement
Table of Contents
