Configuring The Hardware - Honeywell HJK7000 Installation And User Manual

System Administration and Troubleshooting

Configuring the Hardware

56
1. Log onto the controller.
2. From the Settings menu,
press Hardware Config.
The Hardware Config
submenu displays.
Firmware Update
To update firmware, press Slider
FM Update. It may takes several
minutes to update slider firmware.
Keyboard Address
To modify/change the keyboard
address, press Keyboard
Addr.Enter the number using
either the numeric pad or LCD
touch panel. Press Enter to save.
• Press Bkspc to clear.
• Press Quit to cancel.
Note The valid KBD Address is between 1 and 32 in VB mode; and 1 and 99 in
MAXPRO mode.