Related Manuals for New Holland H9880
Summarization of Contents
Safety Rules and Precautions
Personal Safety and Machine Operation
Guidelines for preventing personal injury and machine damage during operation.
General Operational Safety
Broad safety guidelines including slopes, impaired operation, and moving parts.
Specific Hazard Safety
Safety concerning tires, public roads, fire, explosions, and batteries.
Operator and System Safety
Safety related to operator presence, protective structures, AC systems, and PPE.
Environmental and Utility Safety
Precautions for hazardous chemicals, utilities, electrical storms, and environment.
Mounting, Dismounting, and Working at Heights
Safe procedures for entering/exiting the machine and working at heights.
Lifting and Overhead Loads Safety
Safety precautions for lifting and handling loads.
Torque Specifications
Metric Hardware Torque
Torque values for metric non-flanged and flanged bolts and nuts.
Inch Hardware Torque
Torque values for inch non-flanged and flanged bolts and nuts.
Hydraulic Fittings Torque
Torque specifications for hydraulic tubes, fittings, and pipe threads.
Identification Markings
Metric Bolt and Nut Markings
Explanation of identification markings on metric bolts and nuts.
Inch Bolt and Nut Grade Identification
Visual guide to SAE grade identification markings for inch bolts and nuts.
Inch Locknut Markings
Identification methods for inch prevailing torque locknuts.
Shop and Assembly Instructions
Shimming Procedures
Guidelines for selecting and measuring shims for adjustments.
Rotating Shaft Seal Installation
Step-by-step guide for installing rotating shaft seals.
O-ring Seals
Proper lubrication and installation of O-ring seals.
Sealing Compounds
Application instructions for mating surface sealing compounds.
Spare Parts Ordering
Information on ordering genuine CNH and New Holland parts.
Electrical System Protection
Safety measures for charging and welding to protect electronic systems.
Special Tools
Description and benefits of using specialized tools for repairs.
General Specifications
General Dimensions
Overall dimensions, ground clearance, and track width of the machine.
Weight Specifications
Information on machine weight, loaded weight, and GVW.
Engine Specifications
Details on engine power, torque, bore, stroke, and displacement.
Fuel, Cooling, Steering, Transmission, Rear Axle Specs
Specifications for fuel, cooling, steering, transmission, and rear axle systems.
Brakes and Hydraulic System Specs
Details on brake type and hydraulic system pressure and flow.
Electrical, AC, Tire, and Bale Specs
Specifications for electrical, AC, tires, and bale capacity.
Bale Load and Stack Height
Maximum load weight and stack height for bales.
Capacities and Lubricants
Component Capacities
Fluid capacities for tank, engine oil, cooling, hydraulic, transmission, and rear axle.
Lubricant Classifications
Recommended lubricants for engine, hydraulic, transmission, and rear axle.
Product Identification
Product Identification Number (PIN)
How to identify components using PIN, serial numbers, and manufacturing codes.
Wagon and Engine Identification Plates
Locations of PIN plates on the bale wagon frame and engine.
Transmission and Rear Axle Identification
Locations of identification plates for transmission and rear axle.
Need help?
Do you have a question about the H9880 and is the answer not in the manual?
Questions and answers