Quick Bypass; Displaying Bypassed Zones - Honeywell Ademco VISTA-32FB User Manual

Quick Bypass

Your system allows you to easily bypass all open (faulted) zones without
having to enter zone numbers individually.
Note: All bypasses are removed when an OFF sequence (security code plus
OFF) is performed.
To use the Quick Bypass feature:
1. Enter your security code and press
BYPASS 007 FRONT
2.
UPSTAIRS BEDROOM
DISARMED BYPASS
3.

Displaying Bypassed Zones

For determining what zones have been previously bypassed. Bypassed zones
can be displayed only when system is disarmed.
1. Enter your security code and press
2. Wait for all bypassed zones to be sequentially displayed.
Bypassing Protection Zones (cont'd)
Typical bypass message
READY TO ARM
BYPASS
6 then press # .
In a few moments, all open zones will be
displayed along with the word BYPASS. Wait
for these zones to be displayed before arming.
Arming the system before bypassed zones are
displayed eliminates all bypasses.
Arm the system as usual when the keypad
displays the "ready" to arm message. Bypassed
zones are unprotected and will not cause an
alarm when violated while your system is
armed.
BYPASS
6 .
–29 –