Changing To A Different Camera - Uniden UDW20553 User Manual

Changing to a Different Camera

On the receiver, press
►
After the last enabled channel, the receiver goes to quad display, then back to the first camera.
1
Each time you press
►
there is a camera present on that channel. If there is no camera signal on a particular channel,
the receiver shows a black screen with the message No Signal.
1
You should only turn a channel On if you have a camera paired to that channel.
►
The receiver skips any channels that are set to Off in the menu.
►
1
to cycle through the enabled channels from CAM1 through CAM4.
2
1
3
, the receiver goes to the next enabled channel, regardless of whether
2
2
(Channel CAM2
set to Off.)
3
2
4
3
3
4
4
NO SIGNAL
4
19