Advertisement
Installing and Removing Modules
Figure 2-19
P M
1 P
1
Attach the appropriate cables.
Step 5
Check the LEDs to ensure proper installation.
Step 6
Save the filler modules with the packaging material.
Removing Modules
High-performance devices on this card can get hot during operation. To remove the card, hold it by
Warning
the faceplate and bottom edge. Allow the card to cool before touching any other part of it or before
placing it in an antistatic bag.
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
Warning
beams or view directly with optical instruments.
Cisco ONS 15530 Hardware Installation Guide
2-26
Module Insertion in Carrier Motherboard
2
1
M 2
S T
A
2
2
Module
Module locking lever
Chapter 2
Installing the Cisco ONS 15530
OL-7706-01
Advertisement
