Advertisement
Chapter 2
Installing the Cisco ONS 15530
Removing SFP Optics with LC Connectors
To remove an SFP with an LC connector from the 8-port FC/GE aggregation card, follow these steps:
Remove the cable from the desired SFP.
Step 1
Remove the SFP from the module by pulling the latch on top of the SFP to release it from the module.
Step 2
(See
Figure 2-18 Removing the Transceiver with the LC Connector
T
X
R
X
T
X
R
X
T
X
R
X
T
X
R
X
T
X
R
X
T
X
R
X
T
X
R
X
T
X
R
X
1
Continue to pull the latch down and use the latch to pull the SFP out of the module. (See
Step 3
Place the removed SFP in a container appropriate for shipping and storage.
Step 4
OL-7706-01
Figure
2-18.)
0
1
2
3
4
1
5
6
2
7
2
Release the latch.
Installing and Removing Line Cards or Motherboards
Pull out the SFP optics.
Cisco ONS 15530 Hardware Installation Guide
Figure
2-18.)
2-23
Advertisement
