Connecting The Camera To A Personal Computer; Setting Ip - JVC VN-T216VPRU Instructions Manual

Connecting the Camera to a Personal Computer

Setting IP

Connecting the Camera to a Personal Computer
Display adapter
Support DirectX9 for example
NVIDIA GeForce 6 Series above
ATI Mobility Radeon 9500 above.
Power Supply
This camera requires a AC24V / PoE power supply. Please make sure you
use the correct power supply before connecting to the camera.
Network Connector
Please use the RJ45 network connector for connecting the camera to your
computer switch.
Switch
If you want to monitor several cameras, the switch is required.
To avoid damage to the camera, never connect more than
one type of power supply (PoE IEEE802.3 Ethernet Class 0
Caution or AC24V power plug) at the same time. If using PoE, this
camera is to be connected only to PoE networks without
routing to external equipments.
This is a network-based camera and must be assigned an IP address first.
The camera's default IP address is 192.168.0.2 and sub mask is
255.255.255.0. To change IP address, open Network Settings page described
later.
If your network uses a DHCP server, an IP address can be assigned
automatically from the DHCP server by enabling DHCP in the Network
Settings page described later.
1. Connect the network cable to the camera and then turn on the camera's
power.
2. Set the personal computer's IP address. The camera's default IP address is
192.168.0.2 and sub mask is 255.255.255.0.
3. Check that the camera and computer are connected by pinging the IP
address you have set. To do this, start a command prompt (Windows: from the
Start Menu, select Program. Then select Accessories and choose Command
Prompt.) Type "Ping 192.168.0.2". If the message "Reply from... " appears, it
means the connection is done.
4. Start Internet Explorer and enter IP address: 192.168.0.2. A login window
will appear. Enter the default user name: admin and password: jvc to log in.
15