JVC VN-C2WU - V-networks Pan/tilt Camera Instructions Manual page 15

Caution Caution
The confirmation screen shown above will appear when the IP address,
subnet mask, host name and power frequency settings are changed.
When OK is clicked in this confirmation screen, the VN-C2WU main unit
internal preset operation will be performed and the IP address, etc., will be
changed. The Factory set (Default) IP address of 192.168.0.2 will become
invalid, and the connection to the VN-C2WU will be no longer possible. When
the WWW browser software is not operated for a certain time, a message
indicating that connection is not possible will appear as a result of IP address
change.
VN-C2WU Settings page "Other Settings"
Press Apply button to enable the setting.
Check the new IP address again.
If there is no mistake in the entry, click on OK.
12