Download Print this page

Main Features; Specifications; Other Features - Sanyo VCC-6584DN - CCTV Camera Specifications

1/3” color ccd dsp vcc-6584dn ntsc high-resolution camera

Advertisement

VCC-6584DN

Main Features

• 1/3-inch CCD image sensor with approx. 410,000 picture elements.
• High horizontal resolution of 540 TV (typical) lines for maximum
details and a noticeably sharper, clearer picture.
• E-Day/Night function (Electronic Day/Night)
The new E-Day/Night function allows an automatic changeover
from color mode to B/W mode. This makes it possible to achieve
24-hour high-quality in light and dark conditions.
• High sensitivity
Sensitivity has significantly increased by about 6dB compared to
conventional models. A newly-developed CCD sensor partners
with SANYO's advanced technologies to enable the camera to
clearly capture objects even in dark conditions.
• High sensitivity for monitoring
Minimum required illumination of 0.25 lx (50 IRE) or 0.1 lx (20 IRE)
with F1.2 lens at high gain.
• Excellent immunity to shock and vibration using all solid-state
components.
• Accurate color is achieved by processing image data through a
color complementary Ye-Cy-Mg-G mosaic filter.
• Built-in DSP (digital signal processing) circuitry delivers superior
color reproduction and reduced noise.
• Two types of backlight compensation selectable.
Multi-spot photometry system: Luminance is measured in 64 separate areas for
optimum backlight compensation even for peripheral and moving objects; features
selectable normal and high modes.
Centre-zone photometry system: Luminance measured at centre and automatic lens
aperture adjustment enable a clear image even when backlit.

Other Features

• TTL auto tracing white-balance system
• Equipped with electronic iris (indoor use)
• Internal / Line-Lock synchronisation system
• DC type auto iris lenses applicable
540 TVL (typical) Cameras for Greater Peace of Mind
VCC-9800
VCC-9600
Surface type
VCC-9800/9700/
VCC-XZ600
VCC-XZ600N
9600/9500
1/4" Color CCD DSP
1/4" Color CCD High-Resolution
High-resolution Weatherproof
AF Speed Dome Cameras
Day/Night AF Zoom Camera
VCC-9684VA
VCC-4794 E
1/4" Color CCD
1/3" Color CCD DSP
Indoor Mini Dome Camera
Day/Night Camera
Caution: Please consult the instruction manual to ensure safe and proper operation of the product.
051
EC00J0303
Distributed by:
VCC-ZM600
VCC-ZM600N
IP Camera
IP Camera
1/4" Color CCD DSP
High-resolution Day/Night
AF Zoom Camera
VCC-5884 E
1/3" Color CCD DSP
High-resolution Camera
Digital System Company of SANYO Electric Co., Ltd. obtained
Quality Management System ISO 9001 and Environmental
Management System ISO 14001 certifications.

Specifications

Model No.
Scanning system
NTSC Standard 525 lines, 30 frames/sec.
Image sensor
1/3" (approx. 4.8 x 3.6 mm) interline transfer method CCD
Effective picture elements
768 (H) x 494 (V)
Horizontal resolution
540 TV lines (typical)
Minimum illumination
20IRE
0.14 lx (at F1.2, GAIN: HI, color mode), 0.1 lx (at F1.2, GAIN: HI, B/W mode)
(approx.)
50IRE
0.35 lx (at F1.2, GAIN: HI, color mode), 0.25 lx (at F1.2, GAIN: HI, B/W mode)
Video output level
1.0 V (p-p) / 75 ohms, composite
Video S/N ratio
More than 50 dB (AGC off)
Backlight compensation
ON / OFF — Slide SW (side)
ON = Multi-spot photometry (64-section) / Center-zone photometry system
— Slide SW (side) (activated when auto iris lens used)
White balance
Auto / Manual — Slide SW (side)
Gain control
Normal / High — Slide SW (side)
Light control
Auto iris / Electronic iris
Lens mount
CS mount (top/bottom selectable)
Flange back
12.5 mm 0.5 mm adjustment
Auto iris lens
DC type
Auto iris output
DC: Drive coil (+, –), Brake (Damp) coil (+, –)
Lens iris level
LEVEL: L to H — VR (side)
Electronic iris
ON (EI) / OFF (AI) — Slide SW (side)
0.35 to 50,000 lx (with F1.2 lens) GAIN HIGH (Color mode)
Electronic iris range
0.35 to 50,000 lx (with F1.2 lens) GAIN HIGH (B/W mode)
Synchronizing system
Internal sync / Line lock — Slide SW (side)
V phase adjustment
LINE PHASE — VR (rear)
Sockets
Video signal
VIDEO OUT — BNC (rear)
Auto iris lens
LENS — 4-pin (side)
Power supply
24V AC, GND — 3-pin terminal (rear)
12V DC, GND — 2-pin terminal (rear)
Operating
Operating
Temperature: –10˚C to 50˚C (14˚F to 122˚F), Humidity: within 90% RH
conditions
Storage
Temperature: –20˚C to 70˚C (–4˚F to 158˚F), Humidity: within 70% RH
Power requirement
24V AC, 60 Hz / 12 to 15V DC
Power consumption (approx.)
3.6 W
Camera mount
1/4" – 20 UNC (top/bottom selectable)
Dimensions (approx.)
56 (W) x 45 (H) x 99 (D) mm
[2.21 (W) x 1.77 (H) x 3.9 (D) in.] (excluding protrusions)
Weight (approx.)
260 g [9.17 oz] (without lens)
Dimensions
56 (2.20)
LENS
LENS 4-pin
28 (1.10)
VIDEO OUT
~ ~
+
-
Rear panel
VCC-6584DN
NOTE: Specifications subject to change without notice.
108 (4.25)
1.4
99 (3.90)
(0.06)
COLOR CCD CAMERA
16
(0.63)
10.7
(0.42)
25.8
1/4"–20UNC
(1.02)
POWER
Threaded hole
(top / bottom selectable)
GND AC24V
CLASS 2
WIRING
DC12V
[Unit: mm (inch)]
SANYO Electric Co., Ltd.
Digital System Company
http://www.sanyosecurity.com
©2008 SANYO Printed in Japan 2008.7 MA
SFA179F
9
(0.35)

Advertisement

loading