Connecting Your Ipod/Iphone; Connecting Your Tv - Pioneer XW-NAV1K-K Operating Instructions Manual

Dvd speaker system for ipod
Hide thumbs Also See for XW-NAV1K-K:
Table of Contents

Advertisement

04
iPod/iPhone playback

Connecting your iPod/iPhone

Caution
• When connecting an iPod/iPhone units,
always use the universal dock adapter
provided with your iPod/iPhone, or a
commercially adapter designed to support
iPod/iPhone. The iPod/iPhone cannot be
connected without a universal dock
adapter; attempting to connect an iPod/
iPhone without a universal dock adapter
will cause damage or malfunction.
iPod nano/
iPod classic/
iPod touch/
iPhone
1
Attach the Universal dock adapter to
iPod/iPhone connector port on the front
panel of this unit.
• An iPod/iPhone universal dock adapter is
not supplied with this unit.
When attaching the Universal dock adapter, be
sure to orient the front-back directions of the
Universal dock adapter correctly. To attach,
first place the protruding tabs on the front side
Note
1 For detailed instructions on using the iPod/iPhone, please refer to the manual supplied with the iPod/iPhone.
2
Some iPods allow the TV output setting to be changed while connected.
When the iPod/iPhone is disconnected from this unit, the iPod/iPhone's TV output setting returns to its original state.
16
En
of the adapter into the depressions on the
iPod/iPhone connector port and press into
position. When attaching the adapter, be
careful not to strike the connectors.
2
• If an iPod/iPhone is connected when this

Connecting your TV

To watch iPod/iPhone images on a television,
perform connections using the included audio/
video cable. For details, see Connecting using
an audio/video cable on page 8.
• When an iPod/iPhone is connected to this
• Before making or changing the
Universal
dock
adapter
Connect your iPod/iPhone.
unit is in standby mode, the power will turn
on and playback of the iPod/iPhone will
begin.
1
unit, the iPod/iPhone's TV output setting is
automatically set to ON.
Caution
connections, switch off the power and
disconnect the power cord from the power
outlet. Plugging in should be the final step.
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xw-nav1-k

Table of Contents