Lens Wizard Submenu - Bosch NBN-498-11P Installation And Operation Manual

40 en | Camera set-up
6.
6.2.2

Lens Wizard submenu

Item
Lens type
Detected
Set Backfocus
now
Set LVL
EXIT
AR18-10-B006 | v1.1 | 2010.06
Infrared
Use this mode if the camera is viewing a scene lit by
infrared light.
Selection
Auto,
Manual, DC-
iris, Video
Installation and Operation Manual
Description
Auto: - automatically selects the type of
lens.
Manual, DC-iris, Video modes: select
the matching lens type to force the
camera to the correct lens mode.
Shows the type of lens detected when
auto lens detection is used.
Select to fully open the iris. Follow the
instructions below for setting the
backfocus for your particular lens type.
After focusing the object of interest
remains in focus under bright and low
light conditions.
Only for video-iris lenses.
Adjust the level control on the lens to
center the level detector indicator (see
below).
Returns to Install menu.
Dinion2X IP Camera
Bosch Security Systems