Bosch NBN-498-11P Installation And Operation Manual page 78

78 en | Advanced Mode
The storage system selected must be available on the network
and completely set up. Amongst other things, it must have an IP
address and be divided into logical drives (LUN).
1.
2.
3.
Activating and Configuring Storage Media
The storage overview displays the available storage media.
Select individual media or iSCSI drives and transfer these to the
Managed storage media list. Activate the storage media in this
list and configure them for storage.
Note:
Each storage medium can only be associated with one user. If a
storage medium is already being used by another user,
decouple the user and connect the drive to the camera. Before
decoupling, make absolutely sure that the previous user no
longer needs the storage medium.
1.
2.
3.
4.
AR18-10-B006 | v1.1 | 2010.06
Enter the IP address of the required iSCSI destination in
the iSCSI IP address field.
If the iSCSI destination is password protected, enter this
into the Password field.
Click the Read button. The connection to the IP address is
established. The Storage overview field displays the
logical drives.
In the Storage overview section, double-click the required
storage medium, an iSCSI LUN or one of the other
available drives. The medium is then added to the
Managed storage media list. Newly added media is
indicated in the Status column by the status Not active.
Click Set to activate all media in the Managed storage
media list. These are indicated in the Status column by the
status Online.
Check the box in the Rec. 1 or Rec. 2 column to specify
which data stream should be recorded on the storage
media selected. Rec. 1 stores stream 1, Rec. 2 stores
stream 2.
Check the boxes for the Overwrite older recordings
option to specify which older recordings can be
Installation and Operation Manual
Dinion2X IP Camera
Bosch Security Systems