5
Entering and Leaving the User Mode
1
Hold down the Shift key and Output Selection key at the same time for
0.5 sec.
The Multi-Print Display displays a "U."
2
Press the Exposure Adjustment key (Darker or Lighter) to select the
specific function.
3
Press the Exposure Mode key to display d(*).
*: Current setting value
4
Press the Exposure Adjustment key (Darker or Lighter) to select the
specific setting value.
Press the Start key to validate the setting value.
5
S tart
If the Exposure Mode key is pressed, the setting value is not validated and
the User mode initial screen (U) appears.
If a new function is to be set, start the procedure over beginning with step
2.
5-5
Pressing tMhe Darker key selects the function in the following
order: U → U1→ U2 → U3 .. → U8.
Pressing the Lighter key selects the function in the following
order: U8 → U7→ U6 → U5 .. → U.
Pressing the Darker key selects the setting value in the
following order: d0→ d1 ..
Pressing the Lighter key selects the setting value in the
following order: d5→ d4 ....d0
Miscellaneous