Related Manuals for Seagate SKYHAWK SURVEILLANCE ST1000VX005
Summarization of Contents
Introduction
Introduction to SATA Interface
Explains the advantages and features of the Serial ATA (SATA) interface for drives.
Drive Specifications
Drive Specification Summary Tables
Provides quick reference tables for essential drive specifications for 8TB and 6TB models.
Formatted Capacity and LBA Mode
Details drive capacities, guaranteed sectors, and LBA mode addressing.
Default Logical Geometry
Specifies the default number of cylinders, read/write heads, and sectors per track.
Seek Time Specifications
Details track-to-track and average seek times for drive operations.
Drive Start/Stop Times
Lists power-on to ready, standby to ready, and ready to spindle stop times.
Power Specifications and Requirements
Covers DC power requirements, consumption, and management modes for the drives.
Power Consumption Details
Details DC power requirements (watts, amps) for 1TB and 2TB models.
Typical Current Profile
Presents a graphical representation of the drive's current draw over time.
Conducted Noise Tolerance
Specifies acceptable injected noise levels on power lines for 5V and 12V.
Voltage Tolerance Specifications
Lists the acceptable voltage variations, including noise, for 5V and 12V supplies.
Power Management Modes
Explains the drive's power states: Active, Idle, Standby, and Sleep.
Environmental Specifications
Covers temperature, humidity, shock, and vibration specifications for drive operation.
Drive Case Temperature Limits
Defines ambient temperature and how drive case temperature is measured.
Operating and Non-Operating Temperatures
Lists operating ambient and drive case temperature limits, and non-operating ranges.
Temperature Gradient Limits
Specifies the maximum permissible temperature change rates during operation and non-operation.
Humidity Specifications
Details relative humidity and wet bulb temperature limits for operating and non-operating states.
Altitude Operating Limits
Specifies the operating and non-operating altitude ranges for the drives.
Shock Resistance Specifications
Details operating and non-operating shock levels for 1TB-4TB and 6TB-8TB models.
Vibration Resistance Specifications
Lists operating and non-operating vibration levels the drives can withstand.
Drive Acoustics and Sound Power
Describes sound power levels (bels) during idle and seek operations for different models.
Electromagnetic Immunity Standards
Lists radio frequency environments and compliance standards for EMC immunity.
Reliability and MTBF
Explains Mean Time Between Failure (MTBF) and its assumptions for NAS environments.
Warranty Information
Directs users to the Seagate website for determining drive warranty status.
Agency Certifications
Lists safety and electromagnetic compatibility certifications for the drives.
Environmental Protection Compliance
Covers compliance with RoHS and China RoHS 2 regulations for hazardous substances.
Corrosive Environment Resistance
Discusses accelerated corrosion testing and precautions for corrosive environments.
Configuring and Mounting the Drive
Handling and Static-Discharge Precautions
Provides essential guidelines for safely handling drives to prevent ESD damage.
Drive Configuration Overview
Explains the point-to-point SATA connection and jumperless operation.
SATA Cable and Connector Details
Describes the SATA interface cable, its conductors, and connector pin definitions.
Drive Mounting Instructions
Provides mounting orientation options, screw types, and torque precautions.
SATA Interface
Hot-Plug Compatibility
Confirms drive compatibility with hot-plugging as per SATA Revision 3.2.
SATA Connector Pin Definitions
Summarizes the signals on the SATA interface and power connectors.
Supported ATA Commands
Lists SATA standard commands supported by the drive, with command codes.
Identify Device Command Details
Explains the Identify Device command and its data structure for drive information.
Set Features Command Functionality
Details how the Set Features command controls drive features like caching and transfer modes.
S.M.A.R.T. Commands Overview
Describes S.M.A.R.T. for failure prediction and lists available S.M.A.R.T. commands.
Need help?
Do you have a question about the SKYHAWK SURVEILLANCE ST1000VX005 and is the answer not in the manual?
Questions and answers