Related Manuals for ACTi B78
Summarization of Contents
Introduction
The List of Models
Details various camera models covered in the manual.
Installing the Camera on a Surface
Step 1: Drill the Holes
Instructions for drilling holes for cable routing during installation.
Step 2: Open the Camera Cover
Procedure for opening the camera's protective dome cover.
Step 4: Install the Camera to the Surface
Instructions for physically mounting the camera to a surface.
Step 5: Connect Camera to Network
Guide for connecting the camera to a network via Ethernet.
Step 6: Access the Camera Live View
How to view the camera's live video feed.
Step 7: Close the Cover
Instructions for securing the camera's dome cover after installation.
Waterproofing Cable Connections
Waterproof Solution with Naked Cable
Steps for waterproofing cable connections using a cable gland.
Waterproof Solution with Conduit
Steps for waterproofing cable connections using a conduit gland.
Other Connections
Connecting a Power Adapter (Optional)
Guide for connecting an external power adapter to the camera.
Connecting DI/DO Devices (Optional)
Instructions for connecting digital input/output devices.
Connecting Audio In / Out Devices (Optional)
Steps to connect audio input or output devices.
Other Adjustments and Accessories
How to Rotate the Viewing Orientation
Procedure to adjust the camera's viewing angle.
How to Install / Remove the Memory Card
Guide for inserting and removing the memory card for local recording.
How to Replace the Dome Cover
Steps for replacing the camera's dome cover, e.g., with a smoked cover.
Accessing the Camera
Configure the IP Addresses
Instructions on setting up IP addresses for camera communication.
Need help?
Do you have a question about the B78 and is the answer not in the manual?
Questions and answers