Related Manuals for ACTi B76A
Summarization of Contents
Safety Instructions
Cleaning
Instructions for safely cleaning the product.
Accessories and Repair Parts
Guidelines on using recommended accessories and repair parts.
Installation
Instructions for installing other devices with the camera.
Servicing
Procedures and warnings regarding product servicing by qualified personnel.
Damage Requiring Service
Conditions under which the product requires servicing due to damage.
Safety Check
Procedure to ensure product safety after service or repair.
Introduction
The List of Models
Lists the specific camera models covered by this hardware manual.
Installing the Camera on a Surface
Step 1: Drill the Holes
Instructions for preparing the mounting surface by drilling necessary holes for cable routing.
Step 2: Open the Camera Cover
Procedure for safely opening the camera's protective dome cover.
Step 3: Prepare to Waterproof and Connect the Cable
Guidance on waterproofing cable connections using glands or conduit.
Step 4: Install the Camera to the Surface
Steps for physically attaching the camera to the prepared surface.
Step 5: Connect Camera to Network
Instructions for connecting the camera to the network via Ethernet.
Step 6: Access the Camera Live View
How to view the live video stream from the camera.
Step 7: Close the Cover
Final step to secure the camera cover after installation.
Other Connections
Connecting a Power Adapter (Optional)
Guide to connecting an external power adapter if not using PoE.
Connecting DI/DO Devices (Optional)
Instructions for connecting Digital Input/Output devices for event triggers.
Connecting Audio In / Out Devices (Optional)
Steps for connecting audio input or output devices like microphones and speakers.
Other Adjustments and Accessories
How to Rotate the Viewing Orientation
Procedure to adjust the camera's viewing angle and orientation.
How to Install / Remove the Memory Card
Guide for inserting and removing the memory card for local video recording.
How to Replace the Dome Cover
Instructions for replacing the standard dome cover with an alternative.
Accessing the Camera
Configure the IP Addresses
Steps for assigning and configuring IP addresses for camera network access.
Need help?
Do you have a question about the B76A and is the answer not in the manual?
Questions and answers