Automatic Display Of Incoming Alarms - Bosch DB24C4200R2 Operation Manual

62 en | Operation - Live/Playback Mode
5.1.2

Automatic Display of Incoming Alarms

When incoming alarms are received, a red flashing tab
is added to the device list. The cameras or remote stations in
alarm status are shown in the device list and the images are
automatically displayed. An audio signal sounds, if this has
been configured.
Acknowledge
alarm
Delete alarm
Display all alarms
NOTICE!
The automatic display of incoming alarms in live and playback
mode must be configured.
The incoming alarms are saved in the logbook.
F.01U.033.372 | V5 | 2009.09
By right-clicking the remote station icon, you can
acknowledge the alarm, delete the alarm or display all the
cameras in alarm status.
Operation Manual
Acknowledges the alarm. The flashing tab
becomes static.
Deletes the remote station from the
device list.
Displays all alarms in the image area. The
system automatically selects the best
type of display.
DiBos/DiBos Micro
Bosch Sicherheitssysteme GmbH