Control Field For Monitors - Bosch DB24C4200R2 Operation Manual

DiBos/DiBos Micro
3.6.5

Control Field for Monitors

After selecting the
control field. Only locally connected cameras can be displayed
on the monitors.
A monitor can be assigned a camera and sequence.
Assigning using "Drag and Drop"
A camera is assigned to a monitor using "Drag and Drop". This
procedure can be repeated as often as necessary. When a new
user logs on, the camera which has been assigned with "Drag
and Drop" is replaced by the camera assigned in the
configuration.
–
or
Bosch Sicherheitssysteme GmbH
Monitor A and B.
Starts sequence i.e. all cameras which have
been assigned to the monitor in the
configuration are displayed one after the
other.
You return to the default view, i.e. the
configured camera is displayed on the
monitor.
§Press and hold the left mouse button, drag a camera from
the camera list onto the monitor in the control field.
Operation Manual
tab, 2 monitors are displayed in the
F.01U.033.372 | V5 | 2009.09
Live Mode | en 31